nevova.blogg.se

1. #Peakhour setup router how to
2. #Peakhour setup router update
3. #Peakhour setup router android
4. #Peakhour setup router code
5. #Peakhour setup router password

Within two minutes, press the WPS button on your router.Enable the WPS feature on your device’s Wi-Fi settings by tapping a WPS icon or select a WPS Connection option.Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS. Also, the WPS function will be disabled if your wireless encryption is WEP.

And, the WPS function cannot be configured when the wireless function of the router is disabled.

#Peakhour setup router android

Wireless devices that support WPS, including Android phones, tablets, and laptops, can connect to your router through this method. Method 4: Use the WPS button (for WPS-supported device only) Note: If you want to connect to a 5 GHz Wi-Fi, try Method 2. Scan it with your phone or tablet to join the preset 2.4 GHz Wi-Fi d irectly.

#Peakhour setup router code

Method 3: Connect via QR code (for smart device only)įind the QR code printed on the label of the router.

#Peakhour setup router password

Select the SSID and then enter the corresponding password to join the network. Go to the Wi-Fi settings of your PC or smart device. Locate the SSID (Network Name) and Wireless Password printed on the label of the router.Ģ. Method 2: Connect via Wi-Fi settings (for PC or smart device)ġ. Method 1: Connect via an ethernet cable (for PC only)ĭirectly connect the computer to the router’s LAN or Ethernet port via a network cable. Step 1 Connect your device to a Wi-Fi router Once you‘ve accessed your router, you can change wireless network name and password, configure advanced features like Parental Controls and Guest Network, set LED Schedule of your router and so on. Given the improbability of a home user needing 252 device addresses simultaneously, it’s perfectly fine to assign a device to one of those addresses if you’d prefer to keep everything in, say, the 10.0.0.x block.How to Access Your Wi-Fi Router’s Settings they leave the 10.0.0.2 through 10.0.0.254 block completely untouched) but we don’t feel strongly enough about that to consider it an outright rule. Some people prefer to only use addresses outside of the DHCP range (e.g. Given that there are nearly 17 million addresses in that pool, we’re sure you can find one you like. This means if your router’s pool is 10.0.0.0 through 10.255.255.255 every IP you assign (keeping in mind the prior two rules) should fall within that range. Never assign an address outside of the total available pool of private IP addresses.Even if you’ve changed the IP address of your router for security purposes, we’d still suggest against assigning a computer. 10.0.0.1 as the start address is always reserved for the router. Never assign an address to the very start of the IP pool, e.g.This is the reason the example IP address pool above ends at. 255 as these addresses are typically reserved for network protocols. Your friend’s iPad is given an address, connected to the network, and then when your friend leaves and is no longer using the network that address will return to the pool for available addresses ready to be assigned to another device. As soon as the iPad connected to the router, the router’s DHCP server checks the available list of IP addresses, and assigns an address with an expiration date built in. Your friend visits, they want to jump on your network, so you give them the Wi-Fi password to login and you’re done. With DHCP, however, life is so much easier. That address would be permanently assigned to your friend’s iPad unless you went in later and manually released the address. Without DHCP, you would need to hop on a computer, log into your router’s admin panel, and manually assign an available address to your friend’s device, say 10.0.0.99.

#Peakhour setup router update

They want to get on your network and update some apps on the iPad. Imagine that a friend visits with their iPad.

#Peakhour setup router how to

RELATED: How to Set Up Static DHCP So Your Computer's IP Address Doesn't Change Let’s use an example to illustrate just how wonderful DHCP is and how easy it makes all of our lives.

DHCP is a protocol that automatically assigns a new device an IP address from the pool of available IP addresses without any interaction from the user or a system administrator. The vasty majority of modern computer networks, including the little network in your home controlled by your router, use DHCP (Dynamic Host Configuration Protocol). To help you understand the application of static IP addresses, let’s start with the setup you (and most readers for that matter) have.